Click image to view full size image
Features:
1. This lab injection molding machine is with High utilization of raw materials, less waste, low energy consumption.
2.This Micro injection molding machine is Easy to use, high degree of automation, equipment can be a continuous injection of multiple splines
3. The use of mold clamping system and equipment design, making the mold to replace the installation of convenient and reliable.
4. Small size, light weight, can work on the test bench
5.This Mini lab plastic injection molding machine Can be used with our mini-twin-screw extruder, extruded extruded material directly into the injection tube, which directly into the required products and to avoid the secondary processing of the damage to the material
Technical parameters:
|
Items |
parameters |
|
Injection quantity max |
15g |
|
Injection pressure max |
45Mpa |
|
mold clamping force max |
>12T |
|
Opening mode |
Auto |
|
Sampling method |
Automatic demoulding*（patent） |
|
mold clamping Pressurization mechanism |
15 times boost *（patent） |
|
Dimension (mm) |
700×320×450（L×W×H） |
|
weight |
90kg |
|
Voltage |
200~240V |
|
Current |
3.5A |
|
Total power |
700W |
|
Electrical control |
Taiwan PANDUIT Digital temperature meter： Time control use China Digital display meter |
|
Pneumatic Components |
China cylinder。 |
|
Diameter of injection cylinder |
Φ15mm |
|
Injection tank and injection rod material heat treatment |
Stainless steel 304 nitriding treatment |
|
Temperature control zone |
2 zones |
|
Temperature control power |
Injection tube area：180W Template area：400W |
|
Temperature range |
Room temperature to 280 ℃ Barrel according to the experimental raw materials specified: the module area is generally around 40 ℃. |
|
air compressor or nitrogen bottle |
Pressure1 MPa, Cpacity:0.3L |
E-mail: 